Driver's Manual - In-Vehicle Use

Welcome to FleetGO

Your complete solution for all aspects of fleet management.

This in-vehicle manual helps you become familiar with the FleetGO products you will find in the vehicle. Follow the steps below to get started quickly and efficiently.

In this manual, you will find further explanation on the use of:

• the Private/Business switch;
• the RFID reader, including the use of the RFID tag.

User Manual Private/Business Switch

1. Unlock the car with the car key as you normally do.
2. Start the car.
3. Set the switch to the desired position:
   Light OFF = Business
   Light ON = Private
4. Start your journey.

When the journey is finished and the engine is switched off, the position of the switch selected at that moment is recorded in the trip report.

User Manual RFID Tag

Using the RFID tag when starting the car

1. Unlock the car with the car key as you normally do.
2. Start the car.
3. The RFID reader in the car now emits a sound signal and the light on the reader glows red.
4. Hold the blue FleetGO tag against the reader for about 3 seconds.
5. The sound signal stops and the light on the reader turns green.
6. The identification is now complete and you may start driving.

When the journey is finished and the engine is switched off, the tag is automatically disconnected.

For the next journey, the tag must be presented to the reader again.

You are ready!

For further guidance, you can always visit the FleetGO Help Centre. Here you will find many useful articles to better understand the FleetGO product.

Do you have further questions about the product? Please discuss these internally first with your account admin.
If the required knowledge is not available, your account manager can contact the FleetGO Support Team.

FleetGO Support Contact Details

Telephone: +44 (0)3333 000 321 (option, Support)
Email: support@fleetgo.com